Summary
- Determine ailment and choose the correct points on the body
- Connect the LED emitters to the controller
- Find a comfortable space to work in
- Find a comfortable body position
- Power on the system and choose the appropriate settings
Step 1
The moxaLight System is versatile and can have an affect on a myriad of symptoms and conditions. To begin an effective treatment, review what your symptoms are and the level of pain, and then do a little research to find the best meridian points on the body.
A good measure of of pain is to use the common scale of intensity using the numbers 1 thru 10, with 10 being the highest level of pain.
A simple internet search will help you find the best meridian points to attach the LED array.
Step 2
Take the moxaLight 7 Controller and the LED emitters out of the case. Insert the USB side of the emitters into the micro-USB ports of the Controller. Use both sides of the controller when connecting the array.
For example, for 3 emitters or more, connect 2 on one side, and the rest on the other side.
The recommendation is to use at least 3 emitters to make an effective array.
Step 3
Connect the power adapter to an electrical outlet. You may need to use an extension cord.
Do not connect the power to the controller yet.
Step 4
Get yourself situated in a comfortable area and a body position that is most relaxing to you; sitting or lying down.
Step 5
Attach the adhesives of your choice to the back side of the LED emitters.
Step 6
Attach the LED emitter array to the desired points of the body. Reserve one emitter to attach to the area that has the most pain and/or discomfort.
Step 7
Connect the power adapter to the moxaLight 6 Controller, and allow the system to power up and initialize the software.
Step 8
To choose the right settings, hold down the button (one at time) for 3 seconds until the desired choice appears. Refer to the Settings Page for the right combinations.
Step 9
A typical treatment takes at least 40 minutes, but you can add 10 minute blocks with the “Timer” button. Be sure to hold the button down for at least 3 seconds to make a change.
Sit back and enjoy the benefits of the moxaLight System.